Emlid official blog

The new Reach Firmware 31 is out. Update your firmware to set a static IP address for your Reach and easily access your receiver in a browser through Reach Panel.

A complete guide on PPK mapping with Reach is out! We’ve gathered manuals on setting up Reach UAV kit, geotagging photos, and creating a map with Pix4Dmapper.

First setup is vital for smooth integration. Watch tutorial on how to start working with Reach M2/M+

We’ve got some great deals for you! Save 20% on Reach RS+, Reach M+ and antenna for Reach M+.

The new radio module works at the same frequency range as Reach RS/RS+ LoRa (862–1020 MHz). Fully compatible with Reach RS/RS+.

PPK is widely used for mapping with drones. In this scenario Reach RS/RS+ base on the ground and Reach M+ rover on a drone independently log raw data which is post-processed after the flight.

3DroneMapping is offering mapping services all over the Africa and recently had the privilege of mapping a tiny private island in the Indian ocean just 9 km off the Zanzibar coast.  Luke Wijnberg, surveyor and CEO of 3DroneMapping shared a great story about the resort and its mapping with the Reach modules. The tiny (15ha) island is […]

Tuffwing, a manufacturer of affordable aerial mapping systems recently performed integration of Emlid Reach RTK to enable making precision maps without use of ground control points. The system was benchmarked by comparing direct georeferenced model with a set of GCPs, used solely for error detection purposes. Achieved lateral RMS error is just 4cm according to […]